Laser; Laser Safety; How To Handle The Laser Scanner Unit; Power Supply / Lithium Battery - Canon imageCLASS X LBP1238 II Service Manual

Laser

Laser Safety

Since radiation emitted inside this machine is completely confined with protective housings and external covers, the laser beam
cannot escape from the machine during any phase of normal use by users.
Therefore, this machine is classified as a Class 1 laser product under the international standard IEC60825-1 that is regarded as
safe during normal use.

How to Handle the Laser Scanner Unit

This machine is classified as a Class 1 laser product.
However, the laser scanner unit contains source of Class 3B laser beam and exposure to the beam may cause eye injuries.
Therefore, be sure not to disassemble the laser scanner unit. No adjustment can be made to the laser scanner unit in the machine
in the field.
The mark or the warning label shown in the following figure is affixed on the laser scanner unit.
Dieses Gerät ist der Klasse 1 der Laserprodukte zugeordnet.
Allerdings enthält die Laserscannereinheit eine Laserstrahlquelle der Klasse 3B, die Augenschäden verursachen kann, wenn
man in diesen Strahl blickt.
Deshalb darf die Laserscannereinheit nicht zerlegt werden. An der Laserscannereinheit kann keine Justage vor Ort vorgenommen
werden.
Das in dem folgenden Bild dargestellte Kennzeichen bzw. der Warnaufkleber ist auf der Laserscannereinheit angebracht.

Power Supply / Lithium Battery

Power Supply Guidelines

• As a general rule, do not use extension cords.
If an extension cord must be used, one that meets the rated voltage and current of the product must be used.
When using, untie the bundle and plug the power cord into the root to ensure the connection between the power cord and
extension cord.
CAUTION:
Do not plug multiple cords together to an extension cord. It may cause a fire or electrical shock.
• Use the power plug in an easily accessible location near the host machine.
2
Safety Precautions