Canon imageCLASS X LBP1238 II Service Manual page 169

• Service mode is not used on the Control Panel.
If service mode is accessed from the Control Panel of the host machine, "Log-in user exists already." is displayed when
service mode is accessed from Remote UI.
• When Remote UI service mode (this function) is not being logged in by other users
When service mode is being accessed from Remote UI, "Remote service mode" is displayed on the UI of the host machine.
• When Remote UI is enabled in the setting on the Control Panel
[Settings/Registration] > [System Settings] > [Remote UI Settings] > [Use Remote UI] > [ON]
• When the following setting (Remote UI service mode function) is enabled (setting value: 1) in service mode
COPIER > OPTION > BODY > RMT-SW
0:OFF(default), 1:ON
■ How to Use
1. Activate the Web browser, and access the following URL:
http://<Host machine's IP address or host name>/servicemode.html
Remote service mode
159
9. Service Mode