Temporary Hold - Salus Optima S User Manual

Optima S Thermostat
Tap the Settings button to edit the Schedule Interval 1
Continue to edit the Interval #, Time and Set Point(s) for each of the Intervals desired by
advancing the Interval and editing the Time and Temperature.
For applications where there is both heating and cooling, once you have set the heat
set point, tap the mode button so the cooling icon s
If you wish to skip an Interval (ex 4 intervals: Sleep, Wake, Leave, Return) allow the Time
setting for unwanted intervals to be blank (Time = --:-- and Temperature = - -).
When using a Daily, WKDY/WKND, or WKDY/SA/S schedule, to select the alternate
periods, with the Interval # flashing continue to tap the + or – buttons to step through
the intervals for each; Day, WKDY & WKND, and WKDY, SA and S

Temporary Hold

The thermostat may be placed in a temporary hold state which will temporarily override
the schedule settings until the next interval time is reached. To temporarily override the
scheduled set point, simply increase (+) or decrease (-) set point. When the next interval
time occurs, the thermostat will resume its programmed schedule.
Interval # will flash
Time will flash
Temperature will flash
Interval # will flash
Tap + or – button to select a different Interval
Tap button to move to edit time
Tap + or – to increase or decrease the time
Tap button to move to edit the set point temp
Tap + or – to increase or decrease the set point temp
Tap Mode to switch between heat or cool set point
Tap button to return to Interval
Tap + or – button to select a different Interval
19