Show / Hide Humidity Reading; Humidity Set Point; Set Time; Set Daylight Savings - Salus Optima S User Manual

Optima S Thermostat
The Optima S has an internal humidity sensor which is displayed by default. If you do
not wish to see the humidity value, you can choose to hide the humidity reading.
SHOW HUMIDITY
HIDE HUMIDITY
If Equipment Type Heat Pump (HP) or AC only (--AC) is selected, and the Auxiliary Relay
function is set to Humidify or Dehumidify, the Humidify Set Point prompts will be
displayed. This is the set point around which the humidifier or dehumidifier will be
controlled.
HUMIDITY SETPT
If the Optima S does not have internet connection through the Gateway, you must
manually set the Time, Date and Daylight Savings time.
5
TIME 00:00
DST ADJUST ON
DST ADJUST OFF

SET YEAR 2020

DATE M/D-1/01
5
Not displayed if connected to a Gateway and the internet
(default) Show or hide humidity
reading
(default)
45 %
increment Hour
increment Minute
(default) 5
(default) 5
(default) 5 increment Month
increment Date
Use the + or – buttons to switch between Show
and Hide Humidity.
Set point for controlling
humidifier/dehumidifier
Set Time and Date
Enable/disable Day
Light Saving time
Set Year
Set Month and
Date
Use the + or – buttons to change the
set point value between 20 - 60%.
Tap the symbol to increase the
value for Hour and Minute.
Use the + or – buttons to
change between On and Off.
Use the + or – buttons to
change the value of year.
Tap the symbol to increase the
value for Month and Date.
13