3.5.3 UPNP
Choose Service > UPnP, the p age shown in the following figure appears. This p age is
used to configure UPnP. The system acts as a daemon after you enable it.
3.5.4 IGMP Proxy
Choose Service > IGMP Proxy, the p age shown in the following figure appears. IGMP
proxy enables the system to issue IGMP
system discovered through st andard IGMP interfaces. The system acts as a proxy for it s
hosts after you enable it.
3.5.5 TR-069
Choose Service > TR-069, the p age shown in the following p age appears. In this p age,
you can configure the TR-069 CPE.
hos t messages on behalf of host s that the
40