Table of Contents
Advertisement
Chapter 4 Applied Operations
■ Key Operation
Settings
■ Setting
Operation
Procedure
Operation Level
100.0
Initial Level
Input Type
l. ini
Switch to The
Advanced
Function Level
l. ini
l. ini
Advanced Function Level
Parameter
Initialization
l.
4-12
Using "multi-SP" set point modification, "target value 0 ~ 3" can be changed .
"Multi-SP" display conditions are as follows:
●
For products without event input specifications, "use multi SP " is "ON".
●
For products with event input specifications, "number of multi-SP used" is
"0", "use multi-SP " is "ON".
The relationship between "multi SP" set point and the selected target value is
given below:
Multi Set Point
0
1
2
3
Before setting "number of multi-SP used", cancel protection and switch to the
"advanced function level". For details on canceling protection, see "4.8 Using
The Key Protection Level".
key for 3 or more seconds, from the "operation level" switch to the
(1) Press the
"initial level"
(2) Press the M key ,select
(3) Use the UD key enter
Using the M key or preserve this setting for 2 or more seconds, to switch to
the "advanced function level".
Select Set Point
set point 0
set point 1
set point 2
set point 3
"
switch to advanced function level
"
"
-169
(password) .
"
.
Advertisement
Table of Contents
