Table of Contents
Advertisement
Figure 157. Removing a power supply unit
Next steps
Replace the PSU
or
install the PSU
blank.
Installing a power supply unit
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
2. For systems that support redundant PSU, ensure that both the PSUs are of the same type and have the same maximum
output power.
NOTE:
The maximum output power (shown in watts) is listed on the PSU label.
3. Remove the
PSU
blank.
Steps
Slide the PSU into the PSU bay until the release latch snaps into place.
Installing and removing system components
185
Advertisement
Table of Contents
