Installing The Expansion Card Risers - Dell PowerEdge HS5610 Installation And Service Manual

Figure 96. Removing the Riser 2d
5. For Riser 2e, first remove the cables from the system board connector. Hold the blue touch points, and lift the expansion
card riser from the riser connector on the system board.
Figure 97. Removing the Riser 2e
Next steps
Replace the expansion card

Installing the expansion card risers

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the air shroud.
4. If removed, install the expansion cards into the expansion card risers.
138 Installing and removing system components
riser.
Safety instructions.
Before working inside your system .