Figure 70. Cable routing - 2.5-inch drive backplane with SATA drives
Table 96. Connector descriptions for 2.5-inch drive backplane with SATA drives
From
BP_PWR_1 (backplane power connector)
BP_DST_SA1 (backplane SATA connector, cable marking BP
SA1)
System memory
System memory guidelines
The PowerEdge HS5610 system supports DDR5 registered DIMMs (RDIMMs). System memory holds the instructions that are
executed by the processor.
Your system contains 16 memory sockets organized into 8 channels per processor.
Memory channels are organized as follows:
Table 97. Memory channels
Processor
Channel A
Processor 1
A1
Processor 2
B1
Channel B
Channel C
A7
A3
B7
B3
To
SIG_PWR_1 (system board power connector)
SL13_PCH_SA1 (signal connector on the system board, cable
marking MB SL5)
Channel D
Channel E
A5
A4
B5
B4
Installing and removing system components
Channel F
Channel G
A6
A2
B6
B2
Channel H
A8
B8
111