Table of Contents
Advertisement
Table 18. Storage controller cards (continued)
Supported storage controller cards
● USB
Software RAID
● S160
Drives
The PowerEdge HS5610 system supports:
● 0 drive
● Up to 4 x 3.5-inch SAS/SATA (HDD/SSD) drives
● Up to 6 x 2.5-inch NVMe SSD drives
● Up to 8 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) drives
● Up to 10 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) drives
● Up to 2 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) drives on rear of the system
NOTE:
For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe
PCIe SSD User's Guide at
Infrastructure > Storage Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Select This
Product > Documentation > Manuals and Documents.
Ports and connectors specifications
NIC port specifications
The PowerEdge HS5610 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports embedded on
the LAN on Motherboard (LOM) and integrated on the optional Open Compute Project (OCP) cards.
Table 19. NIC port specification for the system
Feature
LOM
OCP card (OCP 3.0) (Optional)
Serial connector specifications
The PowerEdge HS5610 system supports one optional card type serial connector on rear of the system, which is a 9-pin
connector, Data Terminal Equipment (DTE), 16550-compliant .
The process to install the optional serial connector card is similar to an expansion card filler bracket.
USB ports specifications
Table 20. PowerEdge HS5610 system USB ports specifications
Front
USB port type
No. of ports
USB 2.0-
One
compliant port
iDRAC Direct port
One
(Micro-AB USB
28
Technical specifications
https://www.dell.com/support
USB port type
USB 2.0-
compliant port
USB 3.0-
compliant port
> Browse all products > Infrastructure > Data Center
Specifications
1 GB x 2
1 GbE x 4, 10 GbE x 2, 10 GbE x 4, 25 GbE x 2, 25 GbE x 4
Rear
No. of ports
One
One
Internal (Optional)
USB port type
No. of ports
Internal USB 3.0-
One
compliant port
Advertisement
Table of Contents
