Quilt Guide; Straight Stitch Needle Plate - ELNA 7300 Instruction Manual

Quilt Guide

The quilt guide is helpful when sewing parallel,
evenly spaced rows of stitching.
Loosen the quilt guide holding screw q, slide the
quilt guide in the opening w until the desired width
is set and tighten the screw.
Use a washable marker to draw the first line for
q
stitching. Sew over line. When sewing subsequent
rows of stitching, the quilt guide will rest on the
previous row of stitching.

Straight Stitch Needle Plate

The small needle entry hole on the plate prevents
puckering and skipped stitches on fabrics when
straight stitch sewing (center needle position only).
How to Attach Straight Stitch Needle Plate
Press the "Up/Down Needle" key until the needle is
in an up position. Raise the presser foot.
q
Turn OFF the power switch. Remove the presser
foot and needle. Remove the screws q in the needle
plate.
Remove the standard needle plate. Position the
straight stitch needle plate. Replace the screws q.
Turn ON power switch.
q
Select 1.
Place fabric under presser foot. Check that needle
is in center position. Lower presser foot and sew.
CAUTION:
Only use a straight stitch in center needle
position. Any stitch with sideways movement
(Example: zigzag) will cause the needle to break
because it will hit the plate.
122