Quilt Table; Knee Lifter - ELNA 7300 Instruction Manual

Quilt Table

The table provides more sewing surface to support
large fabric pieces to make sewing easier.
Assemble table by attaching six legs to underside
of quilt table with screws.
Attaching Table to Machine
Fit the table around the machine, as shown in the
illustration. If necessary, adjust height of legs to
level table with machine bed by tightening or
loosening leg screws.

Knee Lifter

The knee lifter allows you to raise or lower the
presser foot without using your hands. This is
especially beneficial when pivoting corners or
sewing patchwork pieces.
Insert knee lifter aligning the slots with the
notches.
The presser foot rises equal to the amount of
pressure applied to the knee lifter. Stop sewing
before moving the knee lifter to the right to raise
the presser foot. Release the knee lifter to lower
the presser foot.
CAUTION:
Do not touch the knee lifter while sewing because the
tension discs will open resulting in the upper thread
tension loosening. In addition, the fabric will not feed
properly.
12