Straight Stitch (Dual Feed Foot: Ad) - ELNA 7300 Instruction Manual

1
(A)
2
(B)
1
2
3

Straight Stitch (Dual Feed Foot: AD)

The Dual Feed foot is extremely effective for sewing
with hard to feed materials such as vinyl or leather. It
also eliminates layer slippage.
See page 32-34 for how to attach the Dual Feed foot
and to engage the Dual Feed device.
To sew
Raise the presser foot and position the fabric next to a
seam guide line on the needle plate. Lower the needle
to the point where you wish to start.
Pull the needle and bobbin threads toward the rear.
Lower the presser foot.
Select 1.
Depress the foot control to start sewing.
Gently guide the fabric along the seam guide line
letting the fabric feed naturally.
NOTE: The Dual Feed foot is used for straight stitch 1.
Dual Feed adjusting dial
(A) If the lower layer puckers, turn the Dual Feed
adjusting dial toward "+".
(B) If the upper layer puckers, turn the Dual Feed
adjusting dial toward "–".
1 Upper layer
2 Lower layer
3 Dual Feed adjusting dial
Set the Dual Feed adjusting dial to 0 when dual feed
mechanism is not used.
120