Seam Guide Line; Turn A Square Corner - ELNA 120 Instruction Manual

q
e
r
t

Seam Guide Line

The numbers on the needle plate indicate the distance
between the center needle position and the line r.
The numbers in front are centimeters.
The numbers in back are fractions of an inch.
Number
Centimeters (cm)
w
q Guide lines
w Cornering guide
e Needle plate
r Center needle position
t Distance between the center needle position and line

Turn a Square Corner

Cornering guide
1
To turn a square corner 5/8" (1.6 cm) from the fabric
edge.
1. Stop stitching and lower the needle by turning
2. Raise the presser foot and turn the fabric to line
the edge with the 5/8" (1.6 cm) seam guide.
3. Lower the presser foot and begin stitching in the
Line up the fabric edge facing you with the
cornering guide shown.
q
16
10
1.0
the handwheel counterclockwise.
new direction.
15 20 3/8˝ 4/8˝ 5/8˝ 6/8˝
1.5 2.0 1.0 1.3 1.6 1.9