Before Operation; Operation Of Remote Control; Laser Pointer Function - Sanyo PLC-SL15 Owner's Manual

BEFORE OPERATION

Left Side
ALL-OFF SWITCH
When using the Remote Control,
turn this switch to "ON." And turn it
to "ALL OFF" when it is not used.
DIP SWITCH IN THE BATTERY
COMPARTMENT
The SW4 is used for laser pointer
on/off switching. SW1-3 is used to
change the Remote Control code. Set
each switch as shown in the table
below. Refer to the menu item
"Remote control" in the SETTING
Menu on page 37.
DIP SWITCH SETTING
SW4 ........ LASER ON/OFF
SW1 SW2 SW3 Code No.
ON ON ON
ON ON
ON OFF
ON OFF
OFF ON
OFF ON
OFF OFF
OFF OFF
This Remote Control emits a laser beam as laser pointer function from the Laser Light Window. When the LASER button is
pressed, laser light goes on. And when the LASER button is being pressed for more than 1 minute or the LASER button is
released, light goes off. The LASER POINTER INDICATOR lights RED and Laser is emitted with RED light to indicate laser
beam is being emitted.
The Laser emitted is a class II laser; therefore, do not look into the Laser Light Window or shine the laser beam on yourself or
other people. Three marks below are caution labels for laser beam.
CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result
hazardous radiation exposure.
LASER POINTER INDICATOR
Laser Light Window
14

OPERATION OF REMOTE CONTROL

LASER POINTER (Drag ON)
INDICATOR
The indicator lights red
while the laser beam is
emitted from Laser Light
Window. It lights green in
drag ON position. (P40)
MUTE BUTTON
Used to mute sound. (P21)
COMPUTER MOUSE
OPERATION BUTTONS
See page 40 for details.
LASER BUTTON
Used to operate Laser
Pointer function. Laser
beam is emitted while
pressing this button within
1 minute.
When using this Laser
Pointer for more than 1
minute, release the LASER
button and press it again.
ON Code 1 Code 1
OFF Code 2
ON Code 3
OFF Code 4
ON Code 5
OFF Code 6
ON Code 7
OFF Code 8

LASER POINTER FUNCTION

AUTO PC ON-OFF
D.ZOOM FREEZE NO SHOW
MUTE
IMAGE
VOLUME- SELECT VOLUME+
MENU KEYSTONE
LASER
P-TIMER
COMPUTER
ZOOM
VIDEO
FOCUS
These caution labels are put on remote control.
POWER ON-OFF BUTTON
Used to turn the projector
on or off. (P19)
AUTO PC ADJ. BUTTON
Use to operate AUTO PC
Adjustment function. (P25)
IMAGE BUTTON
Used to select image level.
(P28, 33)
KEYSTONE BUTTON
Used to correct keystone
distortion. (P20, 36)
FOCUS BUTTON
Used to adjust focus. (P20)