ICP DAS USA ECAN-240-FD User Manual page 59

Step 3
Double-click the name of the module to open the Configure Server (UDP) dialog box, and modify
the basic settings as necessary, e.g., the IP, Mask and Gateway addresses, and then click the
"OK" button to save the new settings.
Step 4
Reset the SW1/SW2 switch on the ECAN-240-FD module to SW2 to "0" and SW1 to "0"
position and reboot the device.
Step 5
Log in to the web configuration pages for the ECAN-240-FD module, using the default web
password, "admin".
59
ECAN-240-FD (Modbus TCP to 2-port CAN FD Gateway) User Manual Version 1.0.0 Page：
Copyright © 2022 ICP DAS Co., Ltd. All Rights Reserved E-mail: service@icpdas.com