ICP DAS USA ECAN-240-FD User Manual page 38

The following is an overview of the parameters contained in the Filter Settings (white list) section:
Item
Add "IP" To The List
Add Range "IP"& Mask "IP" Add an IP address range to the IP Filter List.
Delete IP# "Number"
Delete All
Save Configuration (finish)
Submit
ECAN-240-FD (Modbus TCP to 2-port CAN FD Gateway) User Manual
Copyright © 2022 ICP DAS Co., Ltd. All Rights Reserved
Add an IP address to the IP Filter List.
Delete a specific IP# address from the IP Filter List.
(Number: 0 ~ 4)
Delete all items from the IP Filter List.
Save a new IP Filter List to the Flash memory.
Click this button to save the revised settings to the
ECAN-240-FD.
All settings will take effect after rebooting the device.
Description
Version 1.0.0
E-mail: service@icpdas.com
38
Page：