Getting Started For Ecan-240-Fd; Connecting The Power Supply And The Host Pc - ICP DAS USA ECAN-240-FD User Manual

Modbus tcp to 2-port can fd gateway

Table of Contents

3. Getting Started for ECAN-240-FD

This chapter provides detailed information about how to use the ECAN-240-FD module. Before

using the module, Ethernet configuration and eSearch utility installation procedures must first be

fully completed. Follow the procedure described below:

1. Ensure that the network settings on your PC are configured correctly.

2. Ensure that the Windows firewall or any Anti-Virus firewall software is correctly configured or

temporarily disable these functions; otherwise the

Utility may not work as required. You may need to contact your System Administrator for

more details of how to do this.

3. Check that the SW1/SW2 switch is in the

ECAN-240-FD (Modbus TCP to 2-port CAN FD Gateway) User Manual

"Search Servers"

"0/0"

position

E-mail: service@icpdas.com

function in the eSearch

Version 1.0.0

Page：

Table of Contents