Supplement; Technical Data - Vega VEGACAP 65 Operating Instructions Manual

9 Supplement

9 Supplement
9.1

Technical data

Note for approved instruments
The technical data in the respective safety instructions which are included in delivery are valid for
approved instruments (e.g. with Ex approval). These data can differ from the data listed herein, for
example regarding the process conditions or the voltage supply.
All approval documents can be downloaded from our homepage.
General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Process fitting - thread
Ʋ Process fitting - flange
Ʋ Process seal
Ʋ Insulation (partly insulated)
Ʋ Probe (cable partly PTFE insulated:
ø 6 mm/0.236 in)
Ʋ Probe (cable PTFE partly insulated:
ø 8 mm/0.315 in)
Ʋ Probe (cable PA partly insulated:
ø 12 mm/0.472 in)
Ʋ Gravity weight
Materials, non-wetted parts
Ʋ Plastic housing
Ʋ Aluminium die-cast housing
Ʋ Stainless steel housing (precision
casting)
Ʋ Stainless steel housing (electropol-
ished)
Ʋ Seal between housing and housing lid Silicone
Ʋ Ground terminal
Ʋ Cable gland
Ʋ Sealing, cable gland
Ʋ Blind plug, cable gland
Process fittings
Ʋ Pipe thread, cylindrical (DIN 3852-A)
Ʋ Pipe thread, conical (ASME B1.20.1)
Ʋ Flanges
Cable connected electrically conductive with the gravity weight.
1)
Cable connected electrically conductive with the gravity weight.
2)
30
1)
2)
316L, steel C22.8 (1.0460)
316L
Klingersil C-4400
PA, PTFE
316L
Steel
Steel
316L + PEEK
Plastic PBT (Polyester)
Aluminium die-casting AlSi10Mg, powder-coated (Basis:
Polyester)
316L
316L
316L
PA, stainless steel, brass
NBR
PA
G1, G1½
1 NPT, 1½ NPT
DIN from DN 40, ASME from 1½"
VEGACAP 65 • Two-wire