Vega VEGACAP 65 Operating Instructions Manual page 31

Weight
Ʋ Instrument weight (depending on
process fitting)
Ʋ Gravity weight
Ʋ Cable weight: ø 6 mm (0.236 in)
Ʋ Cable weight: ø 8 mm (0.315 in)
Ʋ Cable weight: ø 12 mm (0.472 in)
Sensor length (L)
Max. tensile load (cable)
Ʋ PTFE partly insulated: ø 6 mm
(0.236 in)
Ʋ PTFE partly insulated: ø 8 mm
(0.315 in)
Ʋ PA partly insulated: ø 12 mm (0.472 in) 10 KN (2248 lbs)
Max. torque (process fitting - thread)
Torque for NPT cable glands and Conduit tubes
Ʋ Plastic housing
Ʋ Aluminium/Stainless steel housing
Measuring frequency
Output variable
Output
Suitable controllers
Output signal
Fault message
Switching delay
Ʋ When immersed
Ʋ When laid bare
Ʋ In the event of a fault
Measurement accuracy (according to DIN EN 60770-1)
Reference conditions according to DIN EN 61298-1
Ʋ Temperature
Ʋ Relative humidity
Ʋ Air pressure
Deviation due to strong, high-frequency
electromagnetic fields acc. to EN 61326
Influence of the ambient temperature
Distance from the process fittings to the set switching point.
3)
Distance from the process fittings to the set switching point.
4)
VEGACAP 65 • Two-wire
0.8 ... 4 kg (0.18 ... 8.82 lbs)
900 g (32 oz)
180 g/m (1.9 oz/ft)
220 g/m (2.36 oz/ft)
230 g/m (2.47 oz/ft)
0.4 ... 32 m (1.312 ... 105 ft)
10 KN (2248 lbs)
10 KN (2248 lbs)
100 Nm (74 lbf ft)
max. 10 Nm (7.376 lbf ft)
max. 50 Nm (36.88 lbf ft)
430 kHz
Two-wire output
VEGATOR 141, 142, 620, 621, 622
> 4 ... < 20 mA (not standardised)
< 2.3 mA
0.7 s
0.7 s
1 s
+18 ... +30 °C (+64 ... +86 °F)
45 ... 75 %
+860 ... +1060 mbar/+86 ... +106 kPa
(+12.5 ... +15.4 psig)
< 3 % of the adjusted measuring range
< 0.15 %/10 K of the adjusted measuring range
9 Supplement
3)
4)
31