Vega VEGACAP 65 Operating Instructions Manual page 19

Electronics and connec-
tion compartment
Wiring plan
VEGACAP 65 • Two-wire
4
3
Fig. 10: Electronics and connection compartment
1 DIL switch for measuring range selection
2 Ground terminal
3 Connection terminals
4 Control lamp
For connection to a controller. The sensor is powered by the connect-
ed controller. Further information is available in chapter " Technical
data", " Ex-technical data" are available in the " Safety information".
The wiring example is applicable for all suitable controllers.
Take note of the operating instructions manual of the controller. Suit-
able controllers are listed in chapter " Technical data".
1
Fig. 11: Wiring plan
1 Voltage supply
5 Connecting to power supply
1
2
19