Table of Contents
Advertisement
User Manual PROFINET / Modbus TCP Master
Document code: MN67611_ENG
Revision 1.001
Page 10 of 29
Industrial Electronic Devices
PROFINET / MODBUS TCP:
The PROFINET and Modbus TCP connection must be made using Connector3 and/or Connector4 of HD67611-A1 with at least a Category 5E
cable. The maximum length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in
cat.5 up to 100 Mbps. To connect the device to a Hub/Switch the use of a straight cable is recommended. To connect the device to a
PC/PLC/other the use of a cross cable is recommended.
ADFweb.com S.r.l.
Advertisement
Table of Contents
Need help?
Do you have a question about the AXIS HD67611-A1 and is the answer not in the manual?
Questions and answers