Adjusting chain tension for the through-axle variant
In the case of the gear hub with through-axle
option, the long right chain line does not have an
automatic tensioning system. It can be adjusted
using a fork at the rear of the bike.
1.
Loosen bolt [A].
2.
Pull the fork backwards to increase the
tension on the chain.
3.
Tighten bolt [A] again.
Adjusting the seat post
Over time, the seat post may develop some play
which can be audible. To eliminate the play, the
guide under the seat can be readjusted.
1.
Loosen hex bolts [A and B] a few turns.
2.
Press the plastic profile against the
extrusion guide.
3.
Tighten hex bolts [A and B] again.
4.
Repeat these steps on the rear side of
the guide attachment.
Version 23.05
[A]
[A]
[C]
[B]
49/59