Van Raam Fun2Go 2 User Manual page 17

Couple the FunTrain
Follow these steps to attach the FunTrain to a
Fun2Go with a ball coupling:
1. Lift the lever of the ball coupling [A]
over the tow ball [B].
2. Hook the safety cable [C] behind the
tow ball and into the bracket [D], as
shown.
3. The ball coupling is securely attached
to the tow ball when the indicator [E]
is in the green area with the "OK" sign.
4. Make sure to fold up the support
wheel after coupling. First, release the
locking bolt [F] by pulling it out.
5. Finally, fold up the support wheel until
the locking bolt clicks back into place
with an audible sound.
Uncouple the FunTrain
1. Unlock the locking bolt [F] of the support wheel by pulling it out.
2. Fold out the support wheel until the locking bolt [F] audibly clicks back into place.
3. Release the break cable [C] so that it is no longer hooked under the bracket [D].
4. Lift the lever and then lift the ball coupling off the tow ball.
Beware that the safety cable comes off the towing ball together with the trailer coupler.
Version 23.05
[A]
[B]
[C]
[D]
[E]
[F]
17/59