Van Raam Fun2Go 2 User Manual page 11

Seat depth
The seating area of the seat can be adjusted to tailor
the seat to the user's comfort. In order to adjust the
seat, follow these steps:
1. Remove the seat cushion [A] from the seat
frame.
2. Now that the seat cushion has been
removed, the seat frame can be adjusted in
relation to the backrest. To do this, loosen
the 4 socket head screws [B] a few turns.
3. Slide the seat frame forwards or
backwards.
4. Tighten the 4 socket-head screws [B].
5. Place the seat cushion by first sliding the
front edge over the seat frame. Then push
the 4 snap covers into the holes.
Caution! Adjusting the seat depth affects the
minimum and maximum inside leg length for the
bike.
Version 23.05
[A]
[B]
[C]
[D]
11/59