Van Raam Fun2Go 2 User Manual page 37

Foot support
Item number: -4232 / -4233 / -4234 / -4235
When using the foot support you can fix your
foot by sliding the two straps [A] in the quick
releases [B].
The quick release can be unlocked by pulling the
lip to the rear. Now the strap can be pulled out.
You can cut the straps to size. The strap should
retain a length of at least five centimetres.
The position of the foot support on the pedal is
adjustable in the longitudinal direction. This
allows you to pedal with the ball of your foot for
better thrust.
1. Slightly loosen the four nuts with a socket
wrench.
2. Slide the plate included the foot support
forwards or backwards into the desired
position. Then tighten the nuts again.
The foot support is also adjustable in width. Only
the outer half of the foot support can be
extended.
1. Slightly loosen the two screws with an Allen
key.
2. Slide the adjustable half of the foot support
to the desired position. Then tighten the
screws again.
With the axel pedal extender the foot support
can be extend further.
Version 23.05
[B]
1.
1.
[A]
2.
2.
37/59