Itamar Medical Ltd.
Figure 26 – Battery removal
5.Remove battery.
NOTE:
If you receive a PHOTO or LED error after you reconnected a new finger probe,
that means that the finger probe is not connected properly and you need to:
1. Disconnect and reconnect the probe.
2. Select NEXT.
3.5
Important Notes
The WatchPAT™ONE should not cause any discomfort or pain.
Should you encounter unbearable discomfort, remove the device and call the help desk.
• Do not attempt to disconnect any part of the unit.
• Do not try to introduce any foreign object into the unit.
• If any part appears disconnected or does not resemble the illustrations, call the service
number for assistance.
• Do not, under any circumstances, attempt to fix the problem yourself.
If you have any questions about using the machine, before, during or after your at-home
recording session, call the service number.
WatchPAT™ONE System
Figure 27 – Battery insertion
6. Insert a new disposable AAA battery.
The direction of '+' and '–' is illustrated
on the battery lid and inside the battery
compartment.
45
Operation Manual