Itamar Medical WatchPAT Instructions For Use

Respiratory effort snore & body position sensor (resbp) for watchpat200u central+

Hide thumbs Also See for WatchPAT:

Download this manual

Home Sleep Test

Instructions for Use:

Respiratory Effort Snore & Body Position

Sensor (RESBP)

for WatchPAT200U Central+

RESBP must be used with zzzPAT version 4.6.69 and above and WP200U

embedded version 3.3228 and above

www.Itamar-medical.com/support-downloads/RESBP

Page 1: Instructions For Use
Home Sleep Test Instructions for Use: Respiratory Effort Snore & Body Position Sensor (RESBP) for WatchPAT200U Central+ RESBP must be used with zzzPAT version 4.6.69 and above and WP200U embedded version 3.3228 and above www.Itamar-medical.com/support-downloads/RESBP...
Page 2: Indications For Use
Integrated Respiratory Effort Snore & Body Position Sensor (RESBP) Indications for Use The RESBP sensor is an accessory of the WatchPAT home care device for use with patients suspected to have sleep related breathing disorders. The integrated sensor monitors the snoring level, which aids in the evaluation of the severity of sleep related breathing disorders, and the body position which aids in the evaluation of the type of sleep related breathing disorders.
Page 3 Preparing the Sensor • Attach the round double sided adhesive sticker to the blue side of the sensor. Applying the Sensor Make sure the room you are sleeping in is as quiet as possible during the night, turn off any possible noise sources. When using the RESBP it is advised to sleep alone in the room.
Page 4 Caution: Federal law restricts this device to sale by or on the order of a physician. ©2017. All rights reserved. EndoPAT, Itamar Medical, the Itamar Medical logo are trademarks of Itamar Medical Ltd. and may be registered in certain jurisdictions.