Figure 6 - Chest Sensor Placement - Itamar Medical OM2196470 Operation Manual

Itamar Medical Ltd.
3.4.5 Attaching the Finger Probe
Proper Finger Probe placement is critical for good performance.

NOTE:
The tab inside the Finger Probe should be removed only AFTER the finger is
inserted into the probe.
To attach the Finger Probe:
1. Insert your index finger (or other, if so instructed) gently into the probe until you feel the end
(see Figure 7).
2. Make sure that the tab marked TOP is on the top of your finger (above your nail).
3. Detach and gradually remove the tab marked TOP slowly and firmly while pressing the tip
of probe against a hard surface (table, leg, etc.) until the tab is completely removed from the
probe (Figure 8). You might feel a slight suction once the tab is removed. For small fingers
secure the probe to the finger with a medical tape.
The Finger Probe is now attached.
WatchPAT™ONE System
Figure 6 – Chest Sensor placement
28 Operation Manual