Table of Contents
Advertisement
4
INSTALLING THE DRIVERS
■ Checking the COM port— continued
D
Microsoft
®
Windows Vista
Start Windows.
q
• When opening the Device Manager, log in as the admin-
istrator.
Connect the PC and the ID-RP4000V [SERVICE T]
w
connector with the USB cable.
Select the Desktop, then move the mouse pointer to
e
the bottom left corner.
Click the Windows "START" icon, right-click "Com-
puter" in the <Start> menu, and then click "Proper-
ties."
The "Control Panel Home" window will appear.
r
Click "Device Manager."
• The "Device Manager" window appears.
If "User Account Control" dialog box appears as
t
shown below, click [Continue].
Click
®
Click
Click "
" of Ports (COM&LPT) on the "Device Man-
y
ager" screen to check the COM port number.
• When the driver is completely installed, "ICOM ID-
RP4000V SERVICE T (COMM)" is displayed. The screen
shows the USB serial COM port number "4."
• The COM port number is displayed instead of "
If the repeater has two COM ports, two COM port
numbers are displayed.
• Depending on the PC environment, the COM port
number may differ.
• If "!" or "×" is displayed on the "Device Manager"
screen, the driver may not be properly installed. In
this case, first uninstall the USB driver, then rein-
stall it.
19
Click
."
M
Advertisement
Table of Contents
