hergom E-20 SE Instructions Manual page 4

Machine Translated by Google
1. INTRODUCTION
IMPORTANT! All local regulations, including those referring
to national or European standards, must be complied with
when installing the appliance.
The way to install the Stove E-20 SE will influence
decisively on safety and proper functioning
of the same.
It is very important to perform a good installation.
In order for the E-20 SE Stove and chimney to be installed
correctly, it is advisable that it be carried out by a professional.
The E-20 SE Stove gives up its heat by radiation, directly heating
walls, ceilings, etc.
2 – PRESENTATION
The E-20 SE wood stoves have the following main characteristics:
• Constructed of cast iron, with parts assembled, sealed and bolted
together.
• They are designed to be used only with firewood.
• Hearth that allows burning logs of firewood
up to 45 cm. of length.
• Self cleaning glass.
• Hinged front door with glass.
• Watertight ashtray door.
• Vertical smoke outlet Ø 150 mm.
It gives up its heat by radiation, heating
directly walls, ceilings, etc.
• Supplied fully assembled from the factory, ready to connect to the
chimney.
Glass cleaning air regulation
valve
Door opening command
ashtray door
Fig. 1
4