hergom E-20 SE Instructions Manual page 32

Machine Translated by Google
1. INTRODUCTION
IMPORTANT! All local regulations, including those referring to
national or European standards, must be complied with when
installing the appliance.
The way to install the E-20 SE Stove will influence
decisively in its safety and proper functioning.
It is very important to perform a good installation.
It is recommended that the installation of the E-20 SE and
the chimney be carried out by a professional.
The E-20 SE stove sends heat through radiation, directly heating
walls, ceilings, etc.
2 - PRESENTATION
The E-20 SE wood stove has the following main features:
• Made of cast iron, with parts assembled, sealed and screwed
together.
• They are designed to work with firewood only.
• Allows you to burn firewood up to 45 cm in length
length.
• Self-cleaning glass.
• Swing front door with vitroceramic glass.
• Watertight ashtray door.
• Vertical smoke outlet through the Ø 150 mm plate.
• Gives away its heat by radiation, directly heating walls, ceilings, etc.
• Supplied fully assembled at the factory
prepared to connect to the chimney.
Glass cleaning valve
command opening
brings
ashtray door
Fig. 1
32