hergom E-20 SE Instructions Manual page 25

Machine Translated by Google
1. INTRODUCTION
IMPORTANT! All local regulations, including those referring to
national or European standards, must be observed when
installing the appliance.
The way in which the E-20 SE Stove is installed
will decisively affect the safety and his
proper operation.
A good installation is very important.
In order for the installation of the E-20 SE stove and the fireplace
is correct, it is recommended that it be done by a professional.
The E-20 SE stove gives off heat by radiation, directly heating walls,
ceilings, etc.
1 3 - STOVE OPERATION
Once the stove has been installed and connected to the fireplace, it
is ready to light the fire.
2 - PRESENTATION
The E-20 SE wood stove has the following main features:
• Cast iron structure, with assembled parts, sealed with
gaskets and screwed together.
• Designed to be used with firewood only
combustion.
• Allows you to burn pieces of wood up to 45 cm in length.
• Automatic glass cleaning.
• Front hinged door with crystal.
• Watertight ashtray door.
• Vertical smoke outlet Ø 150 mm.
• It gives off heat by radiation, directly heating walls, ceilings, etc.
• Supplied completely factory assembled, ready for connection to the
fireplace.
Air regulation valve
Automatic cleaning of
glass.
Door opening command
Fig.
Although the operation of the stove is simple, the combustion process
of solid fuel is complex, as several factors intervene and it takes time
and experience to understand how
25
Ashtray door.
APER