hergom E-20 SE Instructions Manual page 11

Machine Translated by Google
1- INTRODUCTION
IMPORTANT! All local regulations, including those that
refer to national or European regulations, must be
applied when installing this device.
The way the E-20 SE Stove is installed will decisively affect
safety issues and its correct operation.
It is important to install the fireplace correctly. For
the correct installation of the E-20 SE Stove and
chimney, we recommend the installation be performed by a
professional.
The E-20 SE Stove provides heat by radiation; directly
heating walls, ceilings...
2- PRESENTATION
E-20 SE wood stove have the following main features:
• Made of cast iron, with parts that are
assembled, sealed and screwed together.
• They are designed for use with firewood only.
• They can burn pieces of wood up to 45cm. in
length.
• Self-cleaning glass.
• Hinged front door with ceramic glass pane.
• Ash pan door sealed.
• Vertical top smoke flue of 150 mm of diameter.
• It gives up its heat by radiation, directly heating walls,
ceilings, etc.
• Fully factory assembled, ready for connection
to the chimney.
Glass pane cleaning
air valve
Door handle
Ash pan door
Fig. 1
11