Step 3: Reinstall the bottom housing, please take note slot of the housing
10. Troubleshooting
No.
1
2
Phenomena
Node does not send RF to base
station periodically, LED does not
blink
Node does not send RF to base
station according to the alarm,
LED does not blink
Reason
No power supply or battery
ran out
Configuration sending
cycle is incorrect
The alarm configuration is
incorrect
Running out of the number
of alarms set for the day
Solutions
Check that the battery is
empty or not installed
correctly
Check the power supply
Check the send cycle
configuration
Check alarm configuration
Check the configuration for
the maximum number of
alarms per day