Advertisement
Quick Links
Manual for LoRaWAN AG Tilt Angle
Sensor - WSLRW-AG | FW 2
Thank you very much for choosing Daviteq Wireless Sensors. We are the leading wireless sensor manufacturer in the
World. We have a wide range of wireless sensors which support different connectivity like LoRaWAN, Sigfox, Sub-GHz,
NB-IoT...Please find out more information at
This manual is applied to the following products
Item code
WSLRW-AG-...
Information Changes in this version v.s previous version
Item
Improve accuracy and
2
resolution on FW 2
1
Initial version FW 1
To use this product, please refer step by step to the below instructions.
Operating Principle
1. Quick Guide
Reading time: 10 minutes
Finish this part so you can understand and put the sensor in operation with the default configuration from the
factory.
1.1 What is the LoRaWAN AG Tilt Sensor and its principle of
operation?
WSLRW-AG is a LoRaWAN Tilt Sensor that can measure 3 tilt angles X, Y, and Z of any object such as a Tower, Building,
this
HW Version
1
Changes
Changed by
P.N.Diep
P.N.Diep
Battery
Installation
Configuration
Specification
link.
Firmware Version
Changed Date
07-09-2022
01-06-2022
2
Approved by
N.V.Loc
N.V.Loc
Uplink Payload
Connect to the LoRaWAN Gateway
Troubleshooting
Calibration
Warranty and Support
Remarks
Approved Date
07-09-2022
02-06-2022
Advertisement
Related Manuals for daviteq WSLRW-AG Series
Summary of Contents for daviteq WSLRW-AG Series
- Page 1 Sensor - WSLRW-AG | FW 2 Thank you very much for choosing Daviteq Wireless Sensors. We are the leading wireless sensor manufacturer in the World. We have a wide range of wireless sensors which support different connectivity like LoRaWAN, Sigfox, Sub-GHz, NB-IoT...Please find out more information at...
- Page 2 Tree, Electricity Tower, Telecom Tower, Bridges... The Tilt sensor utilizes the combination of an advanced Accelerometer and Gyro meter to deliver high accuracy and stable measurement of the Tilt angle of 03 axis X, Y, and Z. With Ultra-low Power design and smart firmware allows the sensor can last up to 10 years with 02 x AA- type battery (depends on configuration).
- Page 3 AppEUI Default value: 010203040506070809 AppKey Default value: 0102030405060708090A0B0C0D0E0F10 Activation Mode OTAA with local join server Network Mode Public LoraWAN Protocol version 1.0.3 Class Note: If the above settings do not match your network server/application, please refer to section 3.2 Sensor configuration to change the settings Step 2: Register the device on the LoRaWAN network server.
-
Page 4: Maintenance
1.5.2 Battery Installation Please follow the instructions in this link. 1.5.3 Sensor calibration and configuration The LoRaWAN AG Tilt sensor is pre-calibrated at the factory. There is no need to re-calibrate it at the field. 1.5.4 Sensor mounting on wall or pole Please follow this link. - Page 5 3. Advanced Guide 3.1 Operating principle of LoRaWAN AG Tilt Sensor 3.1.1 Operating principle of the complete device The Daviteq LoRaWAN AG Tilt Sensor comprises 02 parts linked internally: - The Daviteq LoRaWAN wireless transmitter; - The Daviteq AG tilt sensor;...
- Page 6 The LoRaWAN wireless transmitter is to read the measurement values from the AG sensor and performs the calculation to deliver the desired output values, then it sends data to the gateway in the following cases: Case 1: when the time of the Data sending cycle is reached. Case 2: when the device is forced to send data by a Magnet key.
- Page 7 lorawan 01.01.00 string Read LoRaWAN protocol v1.0.3 version application 01.03.00.00 string Read application version server v1.3.0.0 mac layer 04.04.02.00 string Read mac layer version v4.4.2.0 deviceEUI Read Device's number, used to register the product on the Network Server by OTAA Lora appEUI Read Application...
- Page 8 Lora Read key number nwkSkey encrypts communication command of the MAC layer of the End Device, which is used to register the product on the Network Server by Lora Read End Device appSkey data encryption number, used to register the product on the Network Server by...
- Page 9 network ID uint32 Read Network server ID number, used to register the product on the Network server by join mode OTAA string Read OTAA: Over-the-Air activation, ABP: Activation Personalization network PUBLIC string Read PUBLIC, mode PRIVATE region code AS923 string Read 1: AS923, 2: KR920, 3:...
- Page 10 spread SF10 string Read SF12, SF11, factor SF10, SF9, SF8, SF7 activation ADR OFF string Read ADR ON, of ADR ADR OFF class string Read sensor type 1-255 uint16 Read 1-254: sensor type, 255: no sensor Read/Write Parameter Table Note: Please check the column Property to identify which parameter requests a password for writing a new value.
- Page 11 3 / 16 Lora key number nwkSkey (Password) encrypts communication command of the MAC layer of the End Device, which is used to register the product on the Network Server by 3 / 16 Lora End Device appSkey (Password) data encryption number, used to...
- Page 12 3 / 16 adaptative uint16 Automatically data rate (Password) adjust data rate, 0: disable, 1: enable current current_configuration configuration 3/16 code of the device 3.3 Calibration or commissioning for AG Tilt sensor Please refer to this link. 4. Product specification Please refer to the detailed specifications in this link.