Step 3: Insert the top plastic housing and locking by M2 screw
7. Troubleshooting
No.
1
2
8. Support contacts
Daviteq Technologies Inc
No.11 Street 2G, Nam Hung Vuong Res., An Lac Ward, Binh Tan Dist., Ho
Chi Minh City, Vietnam.
Tel: +84-28-6268.2523/4 (ext.122)
Email: info@daviteq.com | www.daviteq.com
Revision #5
Created Thu, Aug 5, 2021 8:41 AM by
Updated Fri, Aug 6, 2021 8:26 AM by
Phenomena
The status LED of wireless sensor
doesn't light up
Wireless sensor not connected to
co-ordinator
Manufacturer
Kiệt Anh Nguyễn
Kiệt Anh Nguyễn
Reason
No power supply
Configuration function of
the LED is not correct
No power supply
The configuration function
of the RF data rate is
incorrect
Distributor in Australia and New Zealand
Templogger Pty Ltd
Tel: 1800 LOGGER
Email: contact@templogger.net
Solutions
Check that the battery is
empty or not installed
correctly
Reconfigure the led light
function exactly as
instructed
Check that the battery is
empty or not installed
correctly
Reconfigure the RF data
rate with the button
according to the
instructions