Storage; Tools Required; Functional Description; Construction - GEM 610 Installation, Operating And Maintenance Instruction

The valve's delivery condition:
G
Control function:
1 Normally closed (NC)
2 Normally open (NO)
3 Double acting (DA)
The performance of the valve is checked
G
at the factory.
8.3

Storage

Store the valve free from dust and
G
moisture in its original packaging.
Avoid UV rays and direct sunlight.
G
Maximum storage temperature: 40 °C.
G
Solvents, chemicals, acids, fuels or
G
similar fl uids must not be stored in the
same room as valves and their spare
parts.
8.4

Tools required

The tools required for installation and
G
assembly are not included in the scope
of delivery.
Use appropriate, functional and safe
G
tools.
9

Functional description

GEMÜ 610 is a plastic diaphragm valve with
a 2/2-way body. It has a low maintenance
piston actuator which can be controlled
by inert gaseous media and an integrated
optical position indicator. All medium wetted
parts and the actuator housing are made of
plastic. The valve body and the diaphragm
are available in various designs as shown
in the data sheet. Diverse accessories are
available, such as stroke limiter, electrical
position indicators, electro-pneumatic
positioners and process controllers, pilot
valves, mounting plates.
10
Condition:
closed
open
undefi ned
A
1
2
A
10.1
Device version
Item number
The month of manufacture is encoded in
the traceability number and can be obtained
from GEMÜ.
The product was manufactured in Germany.
23 / 36

Construction

Construction
Valve body
Diaphragm
Actuator

Type plate

Design in accordance with order data
12103529 I 0001
Traceability number
Serial number
Optical
position
indicator
Control
medium
connector 4
Control
medium
connector 2
2
Device-specific data
610