Target Speed Keypad Example; Reset - Racelogic Performance Box Touch V2 Manual

Hide thumbs Also See for Performance Box Touch V2:

Table of Contents

Target Speed Keypad Example

To save your chosen value, press the Confirm button at the bottom right of the screen. Press the Cancel button at the

bottom left of the screen to return to the Settings screen without saving. The unit will remember the value after each

power cycle.

Note: You can enter speed with up to 1 decimal place.

Selecting the

Reset Button

on the bottom right of the screen will reset all results shown on the current screen. When

you press the Reset button, the LEDs will briefly flash green twice.

https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/

User_Guide_%E2%80%93_Performance_Box_Touch_V2/04_Display_Modes_%E2%80%93_Performance_Box_Touch_V2/

Performance_Box_Touch_V2_%E2%80%93_Speed_Display_Mode

Table of Contents

Do you have a question about the Performance Box Touch V2 and is the answer not in the manual?