Avg Mode; Distance Display - Racelogic Performance Box Touch V2 Manual

Hide thumbs Also See for Performance Box Touch V2:

If required, you can choose to have the displayed live speed values smoothed. Available options include 0.0 s, 0.25 s

(default), 0.5 s and 1.0 s and they refer to the amount of time that the displayed data is averaged by. Tap the

corresponding blue button to change the smoothing levels.

IMPORTANT

This option will smooth live speed displays in all relevant screen modes.

Notes:

• Smoothing only applies to the screen displays, not to the recorded data.

• Smoothing introduces a slight delay to the displayed value.

V Avg Mode

You can change whether the average speed on the Average Speed Screen is calculated as Continuous or Moving.

• Continuous: Average speed will start to calculate as soon as an SD card is inserted and initialised.

• Moving: Average speed will start to calculate as soon as the unit detects a speed of more than 0.8 km/h. The

calculations will stop when the speed is less than 0.8 km/h.

This setting lets you change the unit used for the distance travelled when you are using the Average/

Distance screen. The Distance Display setting will toggle between Feet/Miles (if the Distance unit is set to feet in the

General Settings) or will toggle between Metres/Kilometres (if the Distance unit is set to metres in the General

Settings).

https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/

User_Guide_%E2%80%93_Performance_Box_Touch_V2/04_Display_Modes_%E2%80%93_Performance_Box_Touch_V2/

Performance_Box_Touch_V2_%E2%80%93_Speed_Display_Mode