Hydraulic Test Selection
Field Pro® 6040
22267SL Rev A
Before beginning any hydraulic test, identify if the problem is related to the
traction circuit or the lift and tilt angle circuits. Once the faulty system has been
identified, perform tests that relate to that circuit.
If a traction circuit problem exists, consider performing one or more of the
following tests:
Testing the Traction Circuit – Charge Pressure (page
Testing the Traction Circuit – Wheel Motor Efficiency (page
the Traction Circuit – Piston (traction) Pump Flow and Relief Pressure (page
5–30).
If a lift or tilt angle circuit problem exists, consider performing one or more of
the following tests:
Testing the Lift and Tilt Angle Circuits – Relief Valve (RV1)
Pressure (page 5–38)
Flow (page
5–35).
and/or
Testing the Lift and Tilt Angle Circuits – Gear Pump
Page 5–21
Hydraulic System: Testing the Hydraulic System
5–22),
5–26), and/or
Testing