Toro Field Pro 6040 Service Manual page 110

Adjusting the Traction Speed (continued)
Hydraulic System: Adjustments
g403516
1. Left hand traction control lever
H. Tighten the control rod jam nut.
I. Install the speed setting tool. The pin of the tool must fit in the hole of the
adjustment bracket, and the body of the tool must fit over the tab of the
control rod plate. Turn the speed setting tool knob in either direction if
necessary, then secure the tool to the plate with the set screw.
Figure 41
2. Right hand traction control lever
Page 5–44 Field Pro® 6040
22267SL Rev A