Changing The Scale Place Of Operation; Cleaning And Maintenance - KERN IEX Safety-Usage Manual

Hide thumbs Also See for IEX:

zero indication

stable result

weight unit

Changing the scale place of operation

While moving a scale in another place of operation, all safety

measures listed in point 5 of this instruction should be taken.



Unplug the power adapter IEX-A01 from mains.



Check wether the indicator´s electrostatic grounding is correctly plugged and is

not defected.

Clean the scale and the housing with a slightly moistened cloth. You can use

typical domestic cleaning agents.

For clearing an overlay of the indicator do not use agents that can

mechanically scratch the surface. It includes an internal conductive layer that is

important for save operation.

Platform levelling feet and shock absorbers are made of rubber. Within the

hazardous area they need to be cleaned with a slightly moistened cloth. Moisture

protects against gathering electrostatic charges.

While clearing the platform do not damage the masking springs. They are for

gathering electrostatic charges from the weight pan. They should be ~5mm above

the shock absorbers.

Cleaning should be performed when there are no explosive gases.

There is forbidden to us concentrated acids, bases, solvents or alcohol for

cleaning the device.

There is also forbidden to use compressed air and high pressure washing

equipment.

IEX-BASV-e-1711

Table of Contents