Description Of Individual Menu Items; Auto Off Function; Zero-Tracking - KERN EMB-S Series Operating Instructions Manual

7.2 Description of individual menu items

7.2.1 AUTO OFF function

For battery operation the balance has an automatic switch-off function which can be
activated or deactivated in the menu. Proceed as follows:
 Call up menu item <AF>, s. chap. 7.1
 Confirm by pressing the OFF-button
 Now you can use the ON/TARE-button to select between the following settings:
Display
„AF Y"
„AF n"
 Confirm your selection with the OFF-button. After a short period the balance
returns automatically to weighing mode.

7.3 Zero-Tracking

The Auto-Zero function is used to tare small variations in weight automatically.
In the event that small quantities are removed or added to the material to be
weighed, incorrect weighing results can be displayed due to the "stability
compensation". (Example: Slowly draining fluids from a container on the balance).
When apportioning involves small variations of weight, it is advisable to switch off this
function.
If Zero-Tracking however is switched off, the weighing display becomes more busy.
Activate/deactivate Zero-Tracking:
 Call up menu item <tr>, s. chap. 7.1
 Confirm by pressing the OFF-button.
 Now you can use the ON/TARE-button to select between the following settings:
Display
„tr Y"
„tr n"
 Confirm your selection with the OFF-button. After a short period the balance
returns automatically to weighing mode.
EMB-S-BA-e-2121
Adjustment
In order to save the battery, the balance switches
automatically off after 3 minutes without weighing.
Continuous operation
Adjustment
Auto-Zero activated
Auto Zero switched off
15