Adjust The Exit Rollers - Pitney Bowes AddressRight DA700 Operating Manual

3 Features and adjustments
®
AddressRight Printer DA700/DA750
Setting Up A
Job
(continued)

8. Adjust the Exit Rollers

Adjust the exit rollers so they overlap the left and right
edges of the material by 1/4". Rotate the release lever to
vertical then slide the rollers from side to side to make
the adjustment and press the lever down to lock. Must
be down and latched to operate.
Exit Roller
Release Lever
IMPORTANT: Make sure the rollers do not touch any
printed area of the material. If this happens, the rollers
will act like a printing press and imprint a faint impres-
sion at incremental distances on the material. If this
happens, move the roller or rollers toward the nearest
clear zone, that is, an area free of printing.
SV61027C · Rev A
Operating Guide
Exit Slide Rollers (in jam-
clearing position)
Page 3-19