Adjust The Exit Rollers - Pitney Bowes W660 Operator's Manual

Setting Up A
Job (continued)
Pitney Bowes W660/W680 Operator Guide
8. Adjust the Upper Exit Rollers
Adjust the upper exit rollers so the outside edge of the rollers
overlap the left and right edges of the material by 1/4". Slide the
rollers from side to side to make the adjustment.
IMPORTANT: Make sure the rollers do not touch any
printed area of the material. If this happens, the rollers will
act like a printing press and imprint a faint impression at
incremental distances on the material. If this happens, move
the roller or rollers toward the nearest clear zone, that is, an
area free of printing.
Output Stack Height
The output stacker holds up to five inches of material before it
becomes necessary to remove the stack from the bin. The op-
tional W760 stacker increases capacity to 300 #10 envelopes.
NOTE: As the stack approaches the 5" limit, there is a poten-
tial for stacking misfeed (pieces not neatly stacked one on top
of the other). This can cause envelopes to stack out of ZIP
Code sequence.
W660/W680 Basics • 3
3-15