Heavy Media Mode; Test Print Head - Pitney Bowes AddressRight DA700 Operating Manual

A Appendix A – Control panel menus
®
AddressRight Printer DA700/DA750
1. Heavy
Media Mode
2. Test Print
Head
The only time you need to turn this mode on is when
you are using long, heavy envelopes. This option
increases motor torque and slows down the feed rate.
This option is normally OFF.
To use this option:
1. Press the + or – buttons to scroll through the
Setup Menu options until the Heavy Media Mode
option appears on the LCD panel.
2. Press the Enter button to select this option.
3. Press the + or – buttons to select A. ON or B. OFF.
4. Press the Enter button to select the desired option.
5. After you have made your selection, press the
Menu button several times to back out of the
Menu, until the printer displays OFFLINE. Then,
press the ON LINE button to enable the printer.
Before you select this option, make sure that the
material is loaded in the printer input area so you can
print a test pattern.
To use this option:
1. Press the + or – buttons to scroll through the
Setup Menu options until the Test Print Head
option appears on the LCD panel.
2. Press the Enter button to select this option.
The LCD will display "Print test pattern?"
SV61027C · Rev A
Operating Guide
Page A-23