Address Recovery - Pitney Bowes AddressRight DA700 Operating Manual

A Appendix A – Control panel menus
®
AddressRight Printer DA700/DA750
5. Address
Recovery
Use this option to direct the printer's memory to go back
a certain number of addresses when an error occurs in
order to reprint the address. The options on this menu
are:
A. Get Addresses
B. Clear Memory.
A. Get Addresses
Select Get Addresses after a jam is cleared and you
want to restart printing at the point where the printer left
off just before the jam occurred. To retrieve any address
in the data buffer, press the Enter button. The first 16
characters of the first line of the last address printed will
be displayed on the LCD. Press the + or – buttons to
scroll through the addresses. When the desired address
appears, press the Enter button to print that address
plus the remaining addresses in the buffer.
NOTE: If you are using the Windows NT operating
system, only cryptic characters will appear.
B. Clear Memory
Clear Memory should be selected before you start a new
batch printing. This is required since the memory will
contain up to twenty addresses from the previous batch.
To use this menu option:
1. Press the + or – buttons to scroll through the Main
Menu options until the Address Recovery option
appears on the LCD panel.
2. Press the Enter button to select this option.
SV61027C · Rev A
Operating Guide
Page A-17