Choosing A Location For Your Printer; Important Safety Notes; Choosing A Location - Pitney Bowes AddressRight DA700 Operating Manual

2 Getting started with the DA700/DA750 printer
AddressRight ® Printer DA700/DA750
Choosing a
Location for
Your Printer
Important
Safety Notes
Page 2-4
Follow these guidelines and safety precautions when
selecting a location for your printer:
• Place the printer on a table or other stable, level
surface within the cable's length (Parallel 10 feet
max.; Serial 15 feet max.) of your computer.
• Allow for adequate space. The DA700/DA750 is 14.7
inches high, 16.2 inches wide and 21.7 inches deep,
without the wire frame input stacker.
• Allow for adequate ventilation around the base and
rear of the printer.
• Protect the printer from heat, dust and moisture.
Avoid placing the printer in direct sunlight.
• To protect against electric shock, plug the machine
into a properly grounded wall outlet.
• DO NOT use an adapter plug. Use of an adapter
could compromise the ground and cause a possible
shock hazard or damage to the equipment in the
event of a short circuit.
• DO NOT remove the ground pin from the line cord.
• Avoid using outlets controlled by wall switches.
Someone could accidently shut your printer off.
• The power cord wall plug is the primary means of
disconnecting the machine from the AC power. The
wall outlet should be near the machine and easily
accessible.
• DO NOT route the power cord over sharp edges or
trap it between pieces of furniture.
• Insure that there is no strain on the power cord where
it passes between the equipment, walls or furniture.
• Be certain the area in front of the wall receptacle into
which the machine is plugged is free from obstruc-
tion.
SV61027C · Rev A
Operating Guide