The message "UNSUPPORTED MODE" is displayed on the LCD screen.
[?]
□ Are resolution and refresh rate of LCD match those on server?
Set display settings of the server to supported resolution and refresh rate.
→
"OUT OF RANGE" appears on the screen.
[?]
□ Are resolution and refresh rate of the server supported by the LCD of the console drawer?
Set display settings of the server to supported resolution and refresh rate.
→
"NO SIGNAL" appears on the screen.
[?]
□ Cable connection may be incorrect.
Check cable connection. Refer to page 55.
→
□ Cable may be damaged.
Check if cable is damaged.
→
□ If the LCD power LED is lit amber, the server may be off-powered.
Check if the server is powered on.
→
Check if the server is in sleep mode or standby state.
→
"POWER SAVING" appears on the screen.
[?]
□ Is the LCD power LED lit amber?
Check if the server is in sleep mode or standby state.
→
Express5800 Series 17.3-inch LCD Console Drawer (1port) User's Guide
97